 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VESD05A6-HA3 Vishay Semiconductors 6-Line ESD-Protection Diode Array in LLP75 Features Ultra compact LLP75-7A package 6-line ESD-protection Low leakage current IR < 1 A Low load capacitance CD = 40 pF ESD-immunity acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge * Working voltage range VRWM = 5 V * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC * * * * * 6 7 5 4 1 19371 19369 2 3 Marking (example only) XX YY 21001 Dot = Pin 1 marking XX = Date code YY = Type code (see table below) Ordering Information Device name VESD05A6-HA3 Ordering code VESD05A6-HA3-GS08 Taped units per reel (8 mm tape on 7" reel) 3000 Minimum order quantity 15000 Package Data Device name VESD05A6-HA3 Package name LLP75-7A Type code AF Weight 5 mg Molding compound flammability rating UL 94 V-0 Moisture sensitivity level Soldering conditions MSL level 1 (according J-STD-020) 260 C/10 s at terminals * Please see document "Vishay Green and Halogen-Free Definitions (5-2008)" http://www.vishay.com/doc?99902 Document Number 84707 Rev. 1.3, 19-Sep-08 For technical support, please contact: ESD-Protection@vishay.com www.vishay.com 1 VESD05A6-HA3 Vishay Semiconductors Absolute Maximum Ratings Rating Peak pulse current Peak pulse power Test condition BiAs-Mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 s; single shot BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 s; single shot Acc. IEC61000-4-2; 10 pulses BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2) Junction temperature Contact discharge Air discharge Symbol IPPM PPP VESD VESD TJ TSTG Value 5 60 30 30 - 40 to + 125 - 55 to + 150 Unit A W kV kV C C ESD immunity Operating temperature Storage temperature Application Note: a) With the VESD05A6-HA3 6 different signal or data lines can be clamped to ground. Due to the different clamping levels in forward and reverse direction the VESD05A6-HA3 clamping behavior is Bidirectional and Asymmetrical (BiAs). L1 L2 L3 6 7 5 4 1 2 3 L4 L5 19365 L6 b) If symmetrical clamping behaviour is required the VESD05A6-HA3 can also be used as a Bidirectional Symmetrical protection device protecting up to 5 lines. In this case pin no. 7 must not be connected. L1 L2 L3 6 7 5 4 1 2 3 L4 L5 19366 www.vishay.com 2 For technical support, please contact: ESD-Protection@vishay.com Document Number 84707 Rev. 1.3, 19-Sep-08 VESD05A6-HA3 Vishay Semiconductors Electrical Characteristics Ratings at 25 C, ambient temperature unless otherwise specified VESD05A6-HA3 BiAs mode (between pin 1, 2, 3, 4, 5 or 6 and pin 7) Parameter Protection paths Reverse stand off voltage Max. reverse current Reverse break down voltage Reverse clamping voltage at IPP = IPPM = 5 A at IPP = 1 A Forward clamping voltage at IPP = IPPM = 5 A at VR = 0 V; f = 1 MHz Line capacitance at VR = 2.5 V; f = 1 MHz CD 24 pF VF CD 3.2 40 4.5 50 V pF VC VF 11.3 1.5 12 1.8 V V Test conditions/remarks Number of lines which can be protected at IR = 1 A at VR = 5 V at IR = 1 mA at IPP = 1 A Symbol Nlines VRWM IR VBR VC 6 5 < 0.1 6.6 8.1 1 7.5 10 Min. Typ. Max. 6 Unit lines V A V V Typical Characteristics Tamb = 25 C, unless otherwise specified 120 % Rise time = 0.7 ns to 1 ns 100 % 80 % 80 % 60 % 20 s to 50 % 40 % 20 % 0% 0 20548 8 s to 100 % Discharge Current IESD 100 % 53 % 40 % 27 % 20 % 0% - 10 0 10 20 30 40 50 60 70 80 90 100 20557 IPPM 60 % 10 20 30 40 Time (ns) Time (s) Figure 1. ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) Figure 2. 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-5 Document Number 84707 Rev. 1.3, 19-Sep-08 For technical support, please contact: ESD-Protection@vishay.com www.vishay.com 3 VESD05A6-HA3 Vishay Semiconductors 50 f = 1 MHz 40 16 Measured acc. IEC 61000-4-5 (8/20 s - wave form) 14 12 10 forward reverse CD (pF) VC (V) 30 8 6 4 20 10 2 0 0 19358 VC 0 1 2 3 4 5 19361 0 5 10 15 20 25 VR (V) IPP (A) Figure 3. Typical Capacitance CD vs. Reverse Voltage VR Figure 6. Typical Clamping Voltage vs. Peak Pulse Current IPP 100 80 70 acc. IEC 61000-4-2 + 8 kV contact discharge 10 60 50 VC-ESD (V) IF (mA) 1 40 30 20 10 0.1 0.01 0 - 10 0.001 0.5 19359 0.6 0.7 0.8 0.9 1 - 20 - 10 0 19363 10 20 30 40 50 60 70 80 90 VF (V) t (ns) Figure 4. Typical Forward Current IF vs. Forward Voltage VF Figure 7. Typical Clamping Performance on + 8 kV - ESD Events (acc. IEC 61000-4-2) 8 7 6 30 20 10 0 VC-ESD (V) 5 VR (V) - 10 - 20 - 30 - 40 - 50 acc. IEC 61000-4-2 - 8 kV contact discharge 4 3 2 1 0 0.01 0.1 1 10 100 1000 - 60 - 70 - 10 0 19362 10 20 30 40 50 60 70 80 90 19360 IR (A) t (ns) Figure 5. Typical Reverse Voltage VR vs. Reverse Current IR Figure 8. Typical Clamping Performance on - 8 kV - ESD Events (acc. IEC 61000-4-2) www.vishay.com 4 For technical support, please contact: ESD-Protection@vishay.com Document Number 84707 Rev. 1.3, 19-Sep-08 VESD05A6-HA3 Vishay Semiconductors 300 250 200 150 100 acc. IEC 61000-4-2 contact discharge VC-ESD (V) 50 0 - 50 - 100 - 150 - 200 - 250 - 300 0 5 10 15 20 25 30 VC-ESD 19364 VESD (kV) Figure 9. Typical max. Clamping Voltage at ESD Contact Discharge (acc. IEC 61000-4-2) Package Dimensions in millimeters (inches): LLP75-7A 20459 Document Number 84707 Rev. 1.3, 19-Sep-08 For technical support, please contact: ESD-Protection@vishay.com www.vishay.com 5 VESD05A6-HA3 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 6 For technical support, please contact: ESD-Protection@vishay.com Document Number 84707 Rev. 1.3, 19-Sep-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of VESD05A6-HA3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |